Diverted valves

3 Way diverted valve - open center

razdjelni ventil

3 ways diverter valves is used to divert the flow towards 2 different outlets.
Sizes:

  • G 3/8"
  • G 1/2"
  • G 3/4"
  • G 1"
  • Hydraulic scheme

Connect P to the pressure flow, A and P to the ports of the hydraulic circuit where flow has to be diverted. With lever inposition 1 the flow is connected towards port A; with lever in position 2, the flow is connected towards port B. With lever in central position ports P, A and B are all connected (open centre).

shema razdjelnog ventila

4 Way diverted valve - closed center

razdjelni ventil

This valve is used to reverse oil flow from 2 ways in towards two ways out. It could be used to control a double acting actuators or to reverse the rotation of an hydraulic motor.
Sizes:

  • G 3/8"
  • G 1/2"
  • G 3/4"
  • G 1"
  • Hydraulic scheme

Connect P to the pressure flow, A and P to the ports of the hydraulic circuit where flow has to be diverted. With lever inposition 1 the flow is connected towards port A; with lever in position 2, the flow is connected towards port B. With lever in central position ports P, A and B are all closed.

shema razdjelnog ventila




4 Way diverted valve - pressure to tank

razdjelni ventil

This valve is used to reverse oil flow from 2 ways in towards two ways out. It could be used to control a double acting actuators or to reverse the rotation of an hydraulic motor.
Sizes:

  • G 1/4"
  • G 3/8"
  • G 1/2"
  • G 3/4"
  • G 1"
  • Hydraulic scheme

Connect P to the pressure flow, T to the tank and ports A and B to the actuators or motor. With lever in position 1, P is connected to A and at the same time B drains into the tank T; with lever in position 2, P is connected to B and at the same time A drains into tank T. With lever in central position all ports are closed (closed centre).

shema regulatora protoka

6 Way diverted valve

razdjelni ventil

This valve is made up by two 3-ways diverters coupled: each of the 2 parts is used to divert the inlet flow towards two ports. The single lever controls both the parts at the same time. It's ideal to control 2 actuators.
Sizes:

  • G 1/2"
  • G 3/4"
  • Hydraulic scheme

Connect P and P' to the 2 pressure flows, ports A and B to the first actuator and ports A' and B' to the second actuator. With lever in position 1, P is connected to A and P' to A'; with lever in position 2, P is connected to B and P' to B'. With lever in central position all ports are connected among each other (opened centre).

shema razdjelnog ventila