- Rod seal- DS 104
Asymmetric rod seal for standard applications as DS103. O-ring activated asymmetric rod seal. Press fit on outside diameter maintains stable fit in the housing. But due to design with active backup ring suitable for larger extrusion gaps or higher pressure range.
Primary use
Seal limitation
Not applicable
| min. Temp. | max. Temp. | max. Speed | max. Pressure | Material | |
|---|---|---|---|---|---|
| -20 °C | +115 °C | 0,4 m/s | max. 400 bar | HPU 94° | POM/PA/PTFEE |
| -20 °C | +115 °C | 0,4 m/s | max. 400 bar | HPU 55° D | POM/PA/PTFEE |
| -50 °C | +115 °C | 0,4 m/s | max. 400 bar | SL-PU 94° | POM/PA/PTFEE |
| -50 °C | +115 °C | 0,4 m/s | max. 400 bar | LT-PU 94° | POM/PA/PTFEE |
| min. Temp. | max. Temp. | max. Speed | max. Pressure | Material | |
| -30 °C | +110 °C | 0,5 m/s | max. 250 bar | NBR 85° | POM/PA/PTFEE |
| -20 °C | +150 °C | 0,5 m/s | max. 250 bar | H-NBR 85° | POM/PA/PTFEE |
| -20 °C | +220 °C | 0,5 m/s | max. 250 bar | FPM 82° | POM/PA/PTFEE |
| -45 °C | +130 °C | 0,5 m/s | max. 250 bar | EPDM 85° | POM/PA/PTFEE |
| -60 °C | +200 °C | 0,4 m/s | max. 250 bar | MVQ 85° | POM/PA/PTFEE |
*Materijali
- HPU
- NBR
- H-NBR
- EPDM
- FPM
- MVQ
*Dimenzije
- L1
- L2
- ∅ d1
- ∅ D2
- ∅ D1
*Količina
- /
Nazad
ROTBAN - HYDRAULIC SEALS 
